Inspection
ENGINECOMPONENTS (Part 1):
COMPONENTS (Part 2):
COMPONENTS (Part 3):
COMPONENTS (Part 4):
COMPONENTS (Part 5):
COMPONENTS (Part 6):
COMPONENTS (Part 7):
COMPONENTS (Part 8):
COMPONENTS (Part 9):
COMPONENTS (Part 10):
COMPONENTS (Part 11):
COMPONENTS (Part 12):
COMPONENTS (Part 13):
COMPONENTS (Part 14):
COMPONENTS (Part 15):
COMPONENTS (Part 16):
INSPECTION
1. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 1)
(a) Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.
Maximum warpage: 0.7 mm (0.028 in.)
If the warpage is greater than the maximum, replace the exhaust manifold.
2. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 2)
(a) Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.
Maximum warpage: 0.7 mm (0.028 in.)
If the warpage is greater than the maximum, replace the exhaust manifold.