Front Power Seat Control System

INITIALIZATION

1. INITIALIZE FRONT POWER SEAT CONTROL SYSTEM

NOTICE: The position sensor initialization must be performed if one of the following occurs: 1) the front power seat switch (seat ECU) is replaced or removed and installed; 2) the front seat adjuster is replaced; or 3) the initialization cancel operation is performed.

a. For Driver Side:
Initialize the power seat ECU as follows.
1. Use the reclining operation to move the seatback to the rearmost position, use the lifter operation to move the seat cushion to the lowest position, and continue the operations for 10 seconds or more. This will cancel the initialization.
2. Use the slide operation to move the front power seat to the rearmost lock position (buzzer sounds for 0.1 seconds).

HINT: After the slide operation initialization is complete, the headrest and cushion extender initialization occurs automatically.

3. Use the reclining operation to move the seatback to the foremost lock position (buzzer sounds for 0.5 seconds). The initialization is complete.

HINT: If the initialization is not completed, the buzzer will sound during the manual operation.

b. For Passenger Side:
Initialize the power seat ECU as follows.
1. Use the reclining operation to move the seatback to the rearmost position, use the lifter operation to move the seat cushion to the lowest position, and continue the operations for 10 seconds or more. This will cancel the initialization.
2. Use the slide operation to move the front power seat to the rearmost lock position (buzzer sounds for 0.1 seconds).

HINT: After the slide operation initialization is complete, the headrest and lifter initialization occurs automatically.

3. Use the reclining operation to move the seatback to the foremost lock position (buzzer sounds for 0.5 seconds). The initialization is complete.

HINT: If the initialization is not completed, the buzzer will sound during the manual operation.