Without Scan Tool

DTC CHECK / CLEAR





1. CHECK DTC
(a) Connect the intelligent tester (with CAN VIM) to the DLC3 at the lower part of the instrument panel.
(b) Turn the power switch ON (IG) and turn the intelligent tester on.
(c) Use the intelligent tester to check for DTCs and the freeze frame data, and note or print the result (see the operator's manual for operating instructions).
(d) Confirm the details of the DTCs.
2. CLEAR DTC
(a) Operate the intelligent tester to clear the DTCs and freeze frame data (see the operator's manual for operating instructions).