Horn: Service and Repair
HORN ASSEMBLYREPLACEMENT
1. REMOVE LOW PITCHED HORN ASSEMBLY
a. Disconnect the connector.
b. Remove the bolt and horn.
2. REMOVE HIGH PITCHED HORN ASSEMBLY
a. Disconnect the connector.
b. Remove the bolt and horn.
3. INSTALL LOW PITCHED HORN ASSEMBLY
a. Place the stay onto the baffle part in the radiator support upper, and then install the horn with the bolt.
Torque: 20 Nm (204 kgf.cm, 15 ft.lbf)
b. Connect the connector.
4. INSTALL HIGH PITCHED HORN ASSEMBLY
a. Place the stay onto the baffle part in the radiator support upper, and then install the horn with the bolt.
Torque: 20 Nm (204 kgf.cm, 15 ft.lbf)
b. Connect the connector.