Brake Warning Light Remains ON
Brake Warning Light Remains ONDESCRIPTION
If any of the following is detected, the BRAKE warning light remains on:
^ The skid control ECU connector is disconnected from the skid control ECU.
^ The brake fluid level is insufficient.
^ The parking brake is applied.
^ The EBD is defective.
Wiring Diagram (part 1):
Wiring Diagram (part 2):
NOTICE: When replacing the ABS and TRACTION actuator assembly, perform zero point calibration.
INSPECTION PROCEDURE
Steps 1-4:
Steps 4-7:
Steps 8-9:
Steps 10-11:
Step 12:
