ABS Warning Light Remains ON
ABS Warning Light Remains ONDESCRIPTION
If any of the following is detected, the ABS warning light remains on.
^ The skid control ECU connectors are disconnected from the skid control ECU.
^ There is a malfunction in the skid control ECU internal circuit.
^ There is an open in the harness between the combination meter and the skid control ECU.
HINT: In some cases, the intelligent tester cannot be used when the skid control ECU is abnormal.
Wiring Diagram (part 1):
Wiring Diagram (part 2):
NOTICE: When replacing the ABS and TRACTION actuator assembly, perform zero point calibration.
INSPECTION PROCEDURE
Steps 1-4:
Steps 5-7:
