Component Tests and General Diagnostics

INSPECTION





1. INSPECT TIRE
a. Check the tires for wear and proper inflation pressure.





Cold tire inflation Pressure

b. Using a dial indicator, check the tire runout.
Tire runout: 1.0 mm (0.039 inch) or less





2. ROTATE TIRE

HINT:
^ Rotate tires as shown in the illustration.
^ Rotate as shown in (B) if the spare tire is included in the rotation.





3. INSPECT WHEEL BALANCE
a. Check and adjust the Off-the-car balance.
b. If necessary, check and adjust the On-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lbs.) or less
4. INSPECT BEARING LOOSENESS
5. INSPECT AXLE HUB RUNOUT