Compressor Clutch

INSPECT MAGNETIC CLUTCH CLEARANCE




a. Set the dial indicator to the magnet clutch hub.
b. Connect the battery positive lead to the terminal 3 of magnet clutch connector and the negative lead to the earth wire. Turn on and off the magnet clutch and measure the clearance.

Standard clearance: 0.35 - 0.60 mm (0.014 - 0.024 in.)

If the measured value is out of the standard range, remove the magnet clutch hub and adjust it with magnet clutch washers.

NOTE: Adjustment shall be performed with 3 or less magnet clutch washers.