With Manufacturer Scan Tool

Check the indicator.
When the ignition switch is turned ON, check that the TRAC OFF indicator light goes on for 3 seconds.

HINT: If the indicator check result is not normal, proceed to troubleshooting for the TRAC OFF indicator light circuit.



Using the LEXUS hand-held tester, check the DTC.




1. Hook up the LEXUS hand-held tester.
2. Turn the ignition switch ON.
3. Read the DTC by following the prompts on the tester screen.

HINT: Please refer to the LEXUS hand-held tester operator's manual for further details.