Body - Liftgate Rattle - Latch To Striker
TECHNICAL BULLETINLTB00460NAS2
22 JUNE 2012
ISSUE 2 CHANGES ARE HIGHLIGHTED IN GRAY AND ASTERISKS
SECTION: 501-14
Liftgate Rattle - Latch-to-Striker
AFFECTED VEHICLE RANGE:
Range Rover Sport (LS)
VIN: CA717166 - Onwards
Model Year: 2012 - Onwards
CONDITION SUMMARY:
Situation:
A rattle noise may be heard from the Liftgate. This may be caused by the liftgate latch where it contacts the latch striker.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to apply PEOX 612 Paste to the liftgate latch / striker.
PARTS:
NOTE:
The PEOX 612 Paste should be locally sourced from the Squeaks & Rattles Kit and must be claimed as sublet using code other *(up to $6.22)*.
PEOX 612 Paste - locally sourced from the Squeaks & Rattles Kit
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
NOTE:
The PEOX 612 Paste should be locally sourced from the Squeaks & Rattles Kit and must be claimed as sublet using code other *(up to $6.22)*.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal Warranty policies and procedures apply
REPAIR PROCEDURE
LUBRICATE LIFTGATE LATCH / STRIKER
1.* Remove the liftgate lock latch cover*.
2. Apply PEOX 612 Paste around the barrel of the striker and the interface section of the latch claw.
3.* Install the liftgate lock latch cover*.
Disclaimer