Liftgate Window Latch Adjustment

Liftgate Window Latch Adjustment




1 Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.
2 Remove the liftgate lower trim panel. For additional information, refer to Liftgate Trim Panel




3 Loosen the 2 liftgate glass latch retaining bolts.
4 Close the liftgate glass and check the alignment to adjacent panels.




5 Adjust the bump stops if required.
6 Open the liftgate glass and tighten the latch retaining bolts to 10 Nm (7 lb.ft).
7 Install the liftgate lower trim panel. For additional information, refer to Liftgate Trim Panel