Control Module: Service and Repair

Transmission Control Module (TCM)
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal
1 Disconnect the battery ground cable.
For additional information, refer to Specifications
For additional information, refer to Air Cleaner Air Cleaner













CAUTION: Discard the component.









Installation





Torque to: 25 Nm








M10: 47 Nm
M8: 24 Nm





CAUTION: Make sure that new components are installed.

NOTE:
Do not fully tighten the clamp at this stage.





Torque to: 10 Nm





Torque to: 10 Nm
For additional information, refer to Air Cleaner Air Cleaner
1 Reconnect the battery ground cable.
For additional information, refer to Specifications
Using the diagnostic tool, calibrate the transmission control module (TCM).
Using the diagnostic
tool, re-calibrate the gear shift module (GSM).