Rear Subframe Rear Bushing

Rear Subframe Rear Bushing
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
2 Remove both rear wheels and tires.
For additional information, refer to Wheel and Tire Service and Repair
For additional information, refer to Rear Subframe





CAUTION: Mark the components to aid installation.
Remove the bushing.
Special Service Tool




Hydraulic Cylinder 10t, 204-598

Special Service Tool




Remover/Installer, Subframe Bushing Guide, 204-598-01
Special tool 204-598-01/8 is used to start the bushing removal process, and must be removed after the bushing has released, as it will not pass through the sub-frame bushing aperture.

Installation






CAUTION: Make sure the correct special tool is used to install the bushings to the correct depth.

CAUTION: Make sure that the installation marks are aligned.
1 Install the bushing.
Special Service Tool




Hydraulic Cylinder 10t, 204-598

Special Service Tool




Remover/Installer, Subframe Bushing Guide, 204-598-01
For additional information, refer to Rear Subframe
2 Install the wheels and tires.
For additional information, refer to Wheel and Tire Service and Repair