Winch - Overview

Winch

OVERVIEW
The 9.5XP winch is manufactured by WARN in the U.S.A. The winch features a 6 Horse Power (HP) High Output Parallel Series Wound winch motor.
The winch has 3-stage planetary gearing and full-face contact drum seals, motor and end housing gaskets for extreme duty water resistance.

SPECIFICATIONS:
- WARN Part number: 70100 (12V)
- Rated Line Pull: 9,500 lbs. (4310 kgs) single-line
- Intended Use/Application: Vehicle Recovery
- Motor: 12V 6 hp, High Output Parallel Series Wound
- Remote Control: Remote switch, 12' (3.7m) lead
- Geartrain: 3-Stage Planetary Gear Ratio: 156:1
- Lubrication: 76 Moly low temperature
- Clutch (freespooling): Sliding Ring Gear
- Brake: Automatic Direct Drive Cone
- Wire Rope: 100', 5/16" diameter (30m, 8mm diam.)
- Fairlead: Hawse
- Recommended Battery: 650 CCA minimum for winching
- Battery Leads: 2 gauge, 85" (2.20m)
- Finish: High-gloss dark gray powder coat
- Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
- Weight: 87 lbs. (39.5 kgs.) (winch only, not including mounting cradle).





The above performance figures are based on the first layer of the drum.