Front Door Window Glass (Armored Vehicles)

Front Door Window Glass

Removal

WARNING: It is essential that the glass is fully supported before loosening any fixings.
1 Remove the trim panel from the door. For additional information, refer to Front Door Trim Panel Front Door Trim Panel (3-Door)
2 Remove the outer waist seal from the front door, as described in the Range Rover Workshop Manual.
3 Remove the inner waist seal from the front door, as described in the Range Rover Workshop Manual.
4 Obtain a length of nylon webbing strap and cut into two lengths suitable for supporting the glass in the door frame.




5 Pass the support straps underneath the glass and secure them around the window frame.
6 Remove the electric strut from the door. For additional information, refer to Front Door Window Regulator Motor Service and Repair
7 Remove both gas struts from the door.




8
WARNING: The window glass is extremely heavy and two people are needed to remove it safely.
With an assistant, remove the support straps, then move the glass downwards and forwards, then tilt outwards and extract from the door to the outside of the vehicle.

Installation
1 To install the window glass, reverse the removal procedure.