Transmission Mount: Service and Repair

Transmission Support Insulator

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the transmission crossmember. For additional information, refer to Transmission Support Crossmember Service and Repair




3
NOTE:
4.4L illustration shown, 4.0L and 2.7L Diesel are similar.
Remove the transmission support insulator.
- Remove the 4 bolts.

Installation
1 To install, reverse the removal procedure.
- Clean the component mating faces.
- Tighten the bolts to 60 Nm (44 lb.ft).