Front Safety Belt Retractor

Front Safety Belt Retractor

Removal
1 Position the front seat fully forwards.
2 Make the SRS system safe. For additional information, refer to Standard Workshop Practices Standard Workshop Practices
3 Remove the B-pillar upper trim panel. For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel




4 Release the safety belt upper anchor from the B-pillar.
- Remove and discard the Torx bolt.




5 Release the front seat switch pack trim panel for access.
- Remove the 2 screws.




6 Remove the front safety belt retractor.
- Remove and discard the Torx bolt.

Installation
1 Install the front safety belt retractor.
- Tighten the Torx bolt to 40 Nm (30 lb.ft).
2 Install the front seat switch pack trim panel.
- Tighten the screws.
3 Attach the safety belt upper anchor.
- Tighten the Torx bolt to 40 Nm (30 lb.ft).
4 Install the B-pillar upper trim panel. For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel