Transfer Case Input Shaft Seal

Transfer Case Input Shaft Seal - 4.4L

Service Repair No - 41.20.50

Special Service Tools








Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the transfer case.

3. CAUTION: Care must be taken to avoid damage to the seal register and running surface.

Carefully remove and discard the oil seal.
^ Use the special tool.





Installation

1. CAUTION: Oil seals must be fitted dry.

Install a new seal.
^ Clean the seal register.
^ Use the special tool.





2. Install the transfer case.