Fuel Door Latch: Service and Repair

Fuel Filler Interlock Catch

Service Repair No - 19.55.17

Removal

1. Disconnect the battery ground cable.
2. Remove the LH lower rear quarter trim panel.
3. Remove the fuel filler interlock catch assembly.
^ Remove the clip.
^ Release the cable.
^ Disconnect the electrical connector.





4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the solenoid.
^ Remove the 2 Torx screws.
^ Release the cable.





5. Release and remove the cable.
^ Release the clip.





Installation

1. Install the cable.
^ Secure the clip.

2. Install the solenoid.
^ Attach the cable.
^ Install the Torx screws.

3. Install the fuel filler flap latch assembly.
^ Connect and secure the electrical connector.
^ Carefully secure the clips.

4. Install the rear quarter trim panel.
5. Connect the battery ground cable.