Auxiliary Battery Tray

Auxiliary Battery Tray

Removal
1. Remove the battery cover.
^ Release the 2 clips.







2. Disconnect the battery ground cable.
3. If installed, remove the auxiliary battery.
4. Remove the engine compartment upper heat shield.
^ Remove the screw.
^ Release the 2 clips.







5. Remove the auxiliary battery compartment side wall.
^ Release the battery positive cable and grommet.
^ Release the four clips.







6. Release the A/C pipes.
^ Remove the retaining screw.







7. Remove the auxiliary battery tray.
^ Remove the three retaining nuts.







Installation
1. install, reverse the removal procedure.
^ Tighten the nuts to 12 Nm (9 ft. lbs.).