Rear Safety Belt Retractor

Rear Safety Belt Retractor

Removal

1. Remove the C-pillar trim panel.
2. Release the safety belt upper anchor.
^ Remove and discard the bolt.







3. Remove the rear safety belt.
^ Remove and discard the bolt.
^ Release the rear safety belt retractor.

Installation

1. Install the rear safety belt.
^ Secure the safety belt retractor.
^ Install the new bolt and tighten to 31 Nm (23 ft. lbs.).

2. Secure the safety belt upper anchor.
^ Install the new bolt and tighten to 31 Nm (23 ft. lbs.).

3. Install the C-Pillar trim panel.