Fan Shroud: Service and Repair

Cooling Fan Shroud

Service Repair No - 26.25.11

Removal
1. Disconnect the battery ground cable.
2. Remove the air intake resonator.
3. Remove the upper fan shroud.
^ Release the coolant expansion hose from the clips.
^ Release the fan wiring harness clip.
^ Release the 3 fan shroud clips.





Installation
1. To install, reverse the removal procedure.

Engine Coolant Level Switch

Removal
1. Release the power steering fluid reservoir from the bracket.





2. Release the windshield washer reservoir filler neck.





3. Reposition the coolant expansion tank.
^ Remove the 2 bolts.





4. Remove the engine coolant level switch.
^ Disconnect the engine coolant level switch electrical connector.





Installation

1. NOTE: An audible click can be heard when the engine coolant level switch is correctly installed.

Install the engine coolant level switch.
^ Connect the engine coolant level switch electrical connector.

2. CAUTION: Make sure that the component is correctly located on the locating pegs.

Secure the coolant expansion tank.
^ Tighten the bolts to 10 Nm (7 ft. lbs.).
3. Secure the windshield washer reservoir filler neck.
4. Secure the power steering fluid reservoir to the bracket.