Output Shaft Seal

Output Shaft Seal

Service Repair No - 44.20.21

Special Service Tools








Removal

1. Disconnect the battery ground cable.

2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
3. Remove the transfer case.

4. CAUTION: Care must be taken to avoid damage to the seal register and running surface.

Remove the transmission output shaft oil seal.
^ Use the special tool.





Installation

1. CAUTION: Oil seals must be fitted dry.

Install a new transmission output shaft oil seal.
^ Clean the seal register.
^ Use the special tool.





2. Install the transfer case.
3. Check and top-up the transmission fluid level.
4. Connect the battery ground cable.