Fuel Temperature Sensor: Service and Repair

Fuel Temperature Sensor

Service Repair No - 19.22.08

Removal

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. failure to follow these instructions may result in personal injury.

1. Secure the hood in the service position.
^ Release the support struts.

2. Disconnect the battery ground cable.
3. Remove the engine cover.
4. Remove the fuel temperature sensor.
^ Disconnect the electrical connector.
^ Position an absorbent cloth to collect fluid spillage.

CAUTION: Always plug any open connections to prevent contamination.





Installation
1. Install the fuel temperature sensor.
^ Clean the component mating faces.
^ Tighten the sensor to 7 Nm (5 ft. lbs.).

WARNING: After carrying out repairs, the fuel system must be checked visually for leaks. Failure to follow this instruction may result in personal injury.

2. Connect the fuel temperature sensor electrical connector.
3. Install the engine cover.
4. Connect the battery ground cable.
5. Close the hood.