Front Seat Backrest Heater and Blower Assembly

Front Seat Backrest Heater And Blower Assembly

Removal

WARNING:
^ Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
^ Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
^ The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
^ The correct procedures must always be used when working on SRS components.
^ It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
^ Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse connect the battery.
^ Take extra care when handling SRS components.

1. Disconnect the battery ground cable.
2. Make the air bag supplemental restraint system (SRS) safe.
3. Remove the front seat backrest lower rear cover.
4. Remove the front seat backrest cooling duct.
^ Remove the clip from the front seat backrest cooling duct.







5. Remove and discard the clip from the front seat backrest cover.







6. Release the front seat backrest cover RH inner tension strap.







7. Reposition the front seat backrest heater and blower motor assembly.
^ Carefully release the 2 clips.







8. Remove the 3 screws from the front seat backrest heater and blower motor assembly.







9. Remove the front seat backrest heater and blower motor assembly.
^ Disconnect the front seat backrest heater and blower motor assembly electrical connector.







Installation

1. Install the front seat backrest heater and blower motor assembly.
^ Connect the front seat backrest heater and blower motor assembly electrical connector.

2. Install the 3 screws to the front seat backrest heater and blower motor assembly.
3. Reposition the front seat backrest heater and blower motor assembly.
^ Secure the 2 clips.

4. Secure the front seat backrest cover RH inner tension strap.
5. Install the new clip to the front seat backrest cover.
6. Install the front seat backrest cooling duct.
^ Install the clip to the front seat backrest cooling duct.

7. Install the front seat backrest lower rear cover.
8. Connect the battery ground cable.