Front Door Window Glass: Service and Repair

Front Door Window Glass

Service Repair No - 76.31.01

Special Service Tools





Removal

NOTE: The door glass should be lowered by approximately one third.

1. Carefully remove the outer waist seal.
^ Remove the 2 screws.
^ Release each end of the seal from the door frame.





2. Remove the front door window glass.
^ Using the special tool, release the 2 clips and lift the glass clear of the regulator.
^ Rotate the glass forwards and lift the glass from the door.





3. NOTE:
^ Do not disassemble further if the component is removed for access only.
^ Note the fitted position.

Remove the 2 door glass retaining clips.
^ Remove the 2 Torx screws.
^ Remove the 2 spacing washers.
^ Remove the 2 flat washers.
^ Note their fitted positions.





Installation

1. Install the 2 door glass retaining clips.
^ Install the spacing washers.
^ Install the 2 flat washers.
^ Tighten the Torx screws to 8 Nm (6 ft. lbs.).

2. Install the front door window glass.
^ Engage with each channel and secure in the clips.

3. Install the outer waist seal.
^ Install the screws.