Axle Tube

Axle Tube

Service Repair No - 47.10.42

Removal

1. Remove the RH halfshaft.
2. Remove the axle tube.
^ Remove the bolt from the bushing.
^ Remove the 4 bolts.
^ Rotate and remove the axle tube.
^ Remove and discard the O-ring seal.





Installation

1. Install the axle tube.
^ Clean the component mating faces.
^ Install a new O-ring seal.
^ Tighten the 4 axle tube bolts to 50 Nm (37 lb.ft).
^ Tighten the axle tube bushing bolt to 63 Nm (46 lb.ft).

2. Install the RH halfshaft.