Vehicle Dynamic Suspension
Vehicle Dynamic SuspensionOverview
For information on the operation of the system,
Inspection and Verification
1. Verify the customer concern.
2. Confirm which, if any, warning lights and/or messages were displayed on the instrument cluster. For a list of messages, Information and Message Center
3. Visually inspect for obvious mechanical or electrical faults.
4. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
5. Use the approved diagnostic system or a scan tool to retrieve any diagnostic trouble codes (DTCs) before moving onto the symptom chart or DTC index.
^ Make sure that all DTCs are cleared following rectification.
Make sure that all DTCs are cleared following rectification.