Battery Tray

Battery Tray

Service Repair No - 76.10.30

Removal
1. Remove the battery.
2. Remove the engine compartment upper heat shield.
^ Remove the screw.
^ Release the 2 clips.





3. Remove the battery compartment side wall.
^ Release the battery positive cable and grommet.
^ Release the four clips.





4. Release the heater pipes.
^ Remove the retaining screw.





5. Remove the battery tray.
^ Remove the three retaining nuts.





Installation
1. To install, reverse the removal procedure.
^ Tighten the nuts to 12 Nm (9 ft. lbs.).