Suspension Mode Switch: Service and Repair

Ride and Handling Optimization Switch

Service Repair No - 86.65.11

Removal

1. Disconnect the battery ground cable.
2. Remove the selector lever knob.
3. Remove the ride and handling optimization switch.
^ Release the 6 clips.
^ Disconnect the 4 electrical connectors.





4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the screw cover.
^ Release the clip.

5. Remove the parking brake switch.
^ Remove the 2 screws.





6. Remove the selector lever panel.
^ Release the 4 clips.





Installation

1. Install the selector lever panel.
^ Secure the clips.

2. Install the parking brake switch.
^ Tighten the screws.

3. Install the screw cover.
4. Install the ride and handling optimization switch.
^ Connect the electrical connectors.
^ Secure the clips.

5. Install the selector lever knob.
6. Connect the battery ground cable.