Low Tire Pressure Module

Low Tire Pressure Module

Service Repair No - 86.54.05

Removal

1. Disconnect the battery ground cable.
2. Remove the LH B-pillar upper trim panel.
3. Remove the LH C-pillar upper trim panel.
4. Remove the LH D-pillar upper trim panel.
5. Remove the passenger assist handle.
^ Release the 2 screw covers.
^ Remove the 2 screws.
^ Repeat the above procedure for the other handle.






6. Release the front and rear door weatherstrips for access.






7. Release the liftgate weatherstrip






8. Remove the rear speakers.
^ Remove the speaker grilles.
^ Remove the 6 screws. Disconnect the 2 electrical connectors.






9. Release the headliner for access.
^ Remove the 4 screws.
^ Release the 2 clips.






10. Remove the low tire pressure module.
^ Release and disconnect the 2 electrical connectors.
^ Remove the 2 screws.





Installation

1. Install the low tire pressure module.
^ Install the screws.
^ Connect and secure the electrical connectors.
2. Attach the headliner.
^ Install the screws.
3. Attach the door weatherstrips.
4. Install the passenger assist handles.
^ Install the screws.
^ Secure the screw covers.
5. Install the rear speakers.
^ Connect and secure the electrical connectors.
^ Install the screws.
^ Install the speaker grilles.
6. Install the D-pillar upper trim panel.
7. Install the C-pillar upper trim panel.
8. Install the B-pillar upper trim panel.
9. Connect the battery ground cable.
10. Program a new control module using T4.