Rear Quarter Trim Panel

Rear Quarter Trim Panel

Service Repair No - 76.13.12

Removal

1. If installed, remove the loadspace lamp unit.
^ Carefully release the lamp.
^ Disconnect the electrical connector.





2. Release the liftgate seal.





3. Fold the seat assembly forwards.
4. Remove the door frame seal.





5. NOTE: Note the fitted position.

Remove the lower quarter trim panel.
^ Remove the access cover.
^ Release the 11 clips.





6. NOTE: Do not disassemble further if the component is removed for access only.

Remove the 8 clips.





Installation

1. Install the clips.
2. Install the load space lamp unit.
^ Connect the electrical connector.

3. NOTE: Align to the position noted on removal.

Install the lower quarter trim panel
^ Secure the clips.
^ Install the access cover.

4. Install the liftgate seal.
5. Install the door seal.
6. Fold seat assembly rearwards.