C-Pillar Upper Trim Panel

C-Pillar Upper Trim Panel

Service Repair No - 76.13.35

Removal

1. Release the door aperture weatherstrip.





2. Release the font edge of the lower quarter trim panel.
3. Release the upper trim access cover.

4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the C-pillar upper trim panel.
^ Remove the Torx screw.
^ Release the 2 clips.





5. Remove the 2 C-pillar retaining clips.





Installation

1. Install the clips to the C-pillar upper trim panel.
2. Install the C-pillar upper trim panel.
^ Attach the safety belt.
^ Secure with the clips.
^ Tighten the Torx screw to 6 Nm (4 ft. lbs.).

3. Install the lower quarter trim panel
^ Carefully secure the clips.

4. Install the upper trim access cover.
5. Install the door aperture weatherstrip.