A-Pillar Trim Panel

A-Pillar Trim Panel

Service Repair No - 76.13.26

Removal

1. Release the door weatherstrip to access the A-pillar upper trim panel and instrument panel end panel.





2. Remove the instrument panel end panel.
^ Release the clip.





3. Remove the A-pillar upper trim panel.
^ Release the screw cover.
^ Remove and discard the Torx screw.
^ Release the clip.





4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the screw retainer and clip from the A-pillar upper trim panel.





Installation

1. Install the screw retainer and clip to the A-pillar upper trim panel.
2. Install the A-pillar upper trim panel.
^ Secure with the clip.
^ Install a new Torx screw and tighten to 3 Nm (2 ft. lbs.).
^ Install the screw cover.

3. Install the instrument panel end panel.
^ Secure with the clip.

4. Attach the door weatherstrip.