Loadspace Scuff Plate Trim Panel

Loadspace Scuff Plate Trim Panel

Service Repair No - 76.76.03

Removal

1. Remove the LH loadspace trim panel.
2. Remove the RH loadspace trim panel.
3. Remove the loadspace scuff plate.
^ Release the liftgate seal.
^ Release the 4 clips.





4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the retaining clips.





Installation

1. Install the clips.
2. Install the loadspace scuff plate.
^ Position the locating pegs.
^ Secure the clips.
^ Install the liftgate seal.

3. Install the LH loadspace trim panel.
4. Install the RH loadspace trim panel.