Floor Console Upper Panel

Instrument Panel and Console - Floor Console Upper Panel


Removal and Installation

Removal

1. Disconnect the battery ground cable.


2. Remove the ride and handling optimization switch.
For additional information, refer to: Ride and Handling Optimization Switch, Removal and Installation, Service and Repair






3. Remove the audio unit side trim panels.
- Release the 6 clips.






4. Remove the floor console upper panel.
- Open the cubby box lid.
- Remove the 3 screws.
- Release the 6 clips.
- Release and disconnect the electrical connector



Installation

1. Install the floor console upper panel.
- Connect the electrical connectors.
- Secure the clips.
- Tighten the screws.

2. Install the audio unit side trim panels.
- Secure the clips.

3. Install the ride and handling optimization switch.
For additional information, refer to: Ride and Handling Optimization Switch, Removal and Installation, Service and Repair

4. Connect the battery ground cable.