Floor Console

Instrument Panel and Console - Floor Console

Removal and Installation

Removal

1. Disconnect the battery ground cable.

2. Remove the floor console upper panel.
For additional information, refer to: Floor Console Upper Panel, Removal and Installation, Floor Console Upper Panel

3. Release the transmission selector lever.
- Remove the 4 bolts.
- Disconnect the electrical connector






4. Release the selector cable.
- Remove the clip.






5. Remove the transmission selector lever mount bracket.
- Remove the 4 bolts






6. Remove the driver side closing trim panel.
- Release the clip.
- Remove the 2 screws.
- Disconnect the electrical connector.






7. Remove the passenger side closing trim panel.
- Release the clip.
- Remove the 2 screws.
- Disconnect the electrical connector.






8. Remove the floor console.
- Manoeuvre the front seats to allow access.
- Disconnect the 2 electrical connectors.
- Remove the screw covers.
- Remove the 2 screws.


Installation

1. Install the floor console.
- Connect and secure the electrical connectors.
- Install the screws.
- Install the screw covers.

2. Install the transmission selector lever mount bracket.
- Tighten the bolts to 10 Nm (7 lb.ft).

3. Install the transmission selector lever.
- Secure the cable.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect and secure the electrical connectors.

4. Install the driver side closing trim panel.
- Connect the electrical connector.
- Secure the clip.
- Tighten the screws.

5. Install the passenger side closing trim panel.
- Connect the electrical connector.
- Secure the clip.
- Tighten the screws.

6. Install the floor console upper panel.
For additional information, refer to: Floor Console Upper Panel, Removal and Installation, Floor Console Upper Panel

7. Connect the battery ground cable.