Inspection and Verification

Inspection and Verification

1. Verify the customer concern.
2. Visually inspect for obvious mechanical or electrical faults.

Mechanical Electrical
^ Front touch screen display ^ Fuses CJB - fuse 42P CJB - fuse 52P CJB -
(TSD) fitment and condition fuse 53P CJB - fuse 57P CJB - fuse 58P
^ Rear seat entertainment ^ Electrical harnesses
(RSE) screen fitment and condition
^ Digital versatile disc (DVD) ^ Fibre optic cable harnesses
multi-changer fitment and condition
^ Television antennae ^ Infotainment relay
(two in each rear side window)
^ Display screens
^ DVD multi-changer
^ Television tuner module
^ RSE module
^ Television antenna amplifiers (4)
^ Remote control and batteries

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
4. Use the approved diagnostic system or a scan tool to retrieve any diagnostic trouble codes (DTCs) before moving onto the symptom chart or DTC index.
^ Because the DTCs are stored in more than one module, a complete vehicle read is recommended. Because the DTCs are stored in more than one module, a complete vehicle read is recommended.
^ Make sure that all DTCs are cleared the rectification