Active Stabilization System

Active Stabilization System

Overview

Active stabilization is also known as dynamic response, active roll control or active cornering enhancement, and refers to the control of the front and rear stabilizer (or anti-roll) bars.
For information on the description and operation of the system:

Inspection and Verification

1. Verify the customer concern.
2. Visually inspect for obvious mechanical or electrical faults.





3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. Use the approved diagnostic system or a scan tool to retrieve any diagnostic trouble codes (DTCs) before moving onto the symptom chart or DTC index.
^ Because the DTCs are stored in more than one module, a complete vehicle read is recommended

Because the DTCs are stored in more than one module, a complete vehicle read is recommended
^ Make sure that all DTCs are cleared following rectification

Make sure that all DTCs are cleared following rectification