Coolant Level Sensor: Service and Repair
Engine Coolant Level SwitchRemoval
1. Release the power steering fluid reservoir from the bracket.
2. Release the windshield washer reservoir filler neck.
3. Reposition the coolant expansion tank.
^ Remove the 2 bolts.
4. Remove the engine coolant level switch.
^ Disconnect the engine coolant level switch electrical connector.
Installation
1. NOTE: An audible click can be heard when the engine coolant level switch is correctly installed.
Install the engine coolant level switch.
^ Connect the engine coolant level switch electrical connector.
2. CAUTION: Make sure that the component is correctly located on the locating pegs.
Secure the coolant expansion tank.
^ Tighten the bolts to 10 Nm (7 ft. lbs.).
3. Secure the windshield washer reservoir filler neck.
4. Secure the power steering fluid reservoir to the bracket.