Ride and Handling Optimization
Ride and Handling OptimizationOverview
Ride and handling optimization incorporates the terrain response system which links a number of modules around the vehicle to give the best combination of settings in the different systems.
For information on the description and operation of the system:
Ride and Handling Optimization
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious mechanical or electrical faults.
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. Use the approved diagnostic system or a scan tool to retrieve any diagnostic trouble codes (DTCs) before moving onto the symptom chart or DTC index.
For engine control module DTCs: or For transmission control module DTCs: or For dynamic suspension DTCs: For ABS DTCs: or
Electronic Engine Controls
Electronic Engine Controls
Automatic Transmission
Automatic Transmission
Vehicle Dynamic Suspension
Anti-Lock Control - Traction Control
Anti-Lock Control - Stability Assist
Make sure that all DTCs are cleared following rectification.