Headliner: Service and Repair

Headliner

Service Repair No - 76.64.15

Removal

1. Disconnect the battery ground cable.
2. Remove both A-pillar upper trim panels.
3. Remove both B-pillar upper trim panels.
4. Remove both C-pillar upper trim panels.
5. Remove both D-pillar upper trim panels.
6. Disconnect the RH A-pillar electrical connector.
^ Release the wiring harness from the 4 clips.





7. Remove the sun visor.
^ Remove the cover.
^ Remove the 2 screws.
^ Release from the clip.
^ Disconnect the electrical connector.
^ Repeat the above procedure for the other side.





8. Remove the sun visor retaining clip.
^ Release the screw cover.
^ Remove the screw.
^ Repeat the above procedure for the other side.





9. Remove the front overhead console.
^ Carefully release the 9 clips.
^ Disconnect the 4 electrical connectors.





10. Remove the 4 passenger assist handles.
^ Release the 2 screw covers.
^ Remove the 2 screws.
^ Repeat the above procedure for the other handles.





11. Remove the rear speakers.
^ Remove the speaker grilles.
^ Remove the 6 screws.
^ Disconnect the 2 electrical connectors.





12. Position the front seats fully forward.
13. With assistance, carefully remove the headliner.
^ Release the 4 clips.





14. NOTE: Do not disassemble further if the component is removed for access only.

Remove the interior lamp bezels.
^ Disconnect the electrical connector.
^ Release the 4 clips.
^ Remove the retaining plate.
^ Repeat the above procedure for the other lamp.





15. Remove the volumetric module.
^ Release the 4 clips.
^ Disconnect the electrical connector.





16. Remove the volumetric module bezel.
17. Remove the headliner wiring harness.
18. Remove the 2 clips.





Installation

1. Install the clips.
2. Install the headliner wiring harness.
3. Install the volumetric module bezel.
4. Install the volumetric module.
^ Connect and secure the electrical connector.
^ Secure the clips.

5. Install the interior lamp bezels.
^ Connect the electrical connector.
^ Install the retaining plate.
^ Secure the clips.
^ Repeat the above procedure for the other side.

6. With assistance, carefully install the headliner.
^ Secure with the clips.
^ Install the screws.

7. Reposition the front seats.
8. Install the front overhead console.
^ Connect the electrical connector.
^ Carefully secure the clips.
^ Connect and secure the electrical connectors.

9. Install the sun visors.
^ Connect the electrical connectors.
^ Install the screws.
^ Install the screw covers.
^ Secure the clips.

10. Install the passenger assist handles.
^ Install the screws.
^ Install the screw covers.

11. Install the rear speakers.
^ Connect and secure the electrical connectors.
^ Install the screws.
^ Install the speaker grilles.

12. Connect the RH A-pillar electrical connector.
13. Install both D-pillar upper trim panels.
14. Install both C-pillar upper trim panels.
15. Install both B-pillar upper trim panels.
16. Install both A-pillar upper trim panels.
17. Connect the battery ground cable.