Torque Specifications

Torque Specifications

Power steering pump bolts 25 Nm (18 ft. lbs.)
High pressure line to power steering pump 25 Nm (18 ft. lbs.)
Power steering pump pulley bolts 25 Nm (18 ft. lbs.)
Low pressure line to steering gear++ 40 Nm (30 ft. lbs.)
High pressure line to steering gear++ 36 Nm (27 ft. lbs.)
Steering gear to front subframe nuts/bolts+ 100 Nm (74 ft. lbs.)
Steering gear tie rod end ball joint nuts 80 Nm (59 ft. lbs.)
Universal joint to steering gear bolt** 24 Nm (18 ft. lbs.)
Steering gear tie rod end locknut* 80 Nm (59 ft. lbs.)
Engine mount bracket to engine mount nut/bolt 100 Nm (74 ft. lbs.)
Stabilizer bar link nut 100 Nm (74 ft. lbs.)
Suspension height sensor link arm nut 8 Nm (6 ft. lbs.)
Lower suspension arm nut/bolt:
Stage 1 165 Nm (122 ft. lbs.)
Stage 2 Further 90°
Lower suspension tie rod nut/bolt:
Stage 1 165 Nm (122 ft. lbs.)
Stage 2 Further 90°
Air suspension spring top mount nuts 56 Nm (41 ft. lbs.)
Cooling fan 65 Nm (48 ft. lbs.)
Engine wiring harness to oil pan 6 Nm (4 ft. lbs.)
Suspension height sensor 4 Nm (3 ft. lbs.)
Front End Accessory Drive (FEAD) belt tensioner bolt 40 Nm (30 ft. lbs.)
Engine mount to engine block bolts:
Stage 1 45 Nm (33 ft. lbs.)
Stage 2 Further 60°
Halfshaft support bearing housing bolts 25 Nm (18 ft. lbs.)
Engine mount to front subframe bolts 56 Nm (41 ft. lbs.)

* New nut(s) must be installed
+ New cage nuts must be installed
** New 'Patchlok' bolt must be installed
++ New sealing washers must be installed