Cover - Squab - Front Seat - Models With Adjustable Upper Squab

Cover - Squab - Front Seat - Models With Adjustable Upper Squab

Service Repair No - 78.90.07

Remove

1. Remove seat assembly.







2. Release 3 backboard tension straps from under seat.







3. Remove 2 screws securing lower squab finisher.
4. Release lower finisher from 6 retaining clips and remove.







5. Disconnect 2 tension straps securing upper squab cover.
6. Release velcro strip securing squab cover.







7. Release beading from squab cover finisher.
8. Release finisher from 4 retaining clips and remove.







9. Carefully release 2 retaining clips securing headrest to motor housing.







10. If fitted: Disconnect headrest display unit multiplug and release harness from 4 clips.
11. Remove headrest.







12. Release retaining strip securing squab cover to lower frame.







13. Disconnect multiplugs from headrest and upper squab motors.







14. Disconnect harness multiplugs from lumbar pump and valve.







15. Disconnect multiplug from heated seat circuit.
16. Release 2 retaining strips, securing both sides of lower squab cover to frame.
17. Release squab harness from 4 retaining clips.
18. Remove 2 Torx bolts securing squab frame to seat frame.
19. Remove squab assembly from seat assembly.







20. Release 4 retaining strips securing both sides of squab assembly to frame.
21. Remove squab cover and pad from frame.







22. Remove 19 hog rings securing squab cover to pad, remove cover.







23. Release retaining plate securing headrest finisher to squab cover, remove finisher.

Refit

1. Fit headrest finisher to squab cover and secure with retaining plate.
2. Position squab cover to pad and secure with 19 hog rings.
3. Fit squab cover and pad to frame.
4. Fit 4 retaining strips securing both sides of squab cover to frame.
5. Position and fit squab assembly to seat assembly.
6. Fit squab frame to seat frame, secure with Torx bolts tighten to 25 Nm (18 lbf.ft).
7. Secure squab harness to retaining clips
8. Fit retaining strips securing both sides of lower squab cover.
9. Connect multiplug to heated seat circuit.
10. Connect lumbar harness multiplugs to pump and valve.
11. Connect multiplugs to headrest and squab motor.
12. Fit retaining strip securing lower squab cover to frame.
13. Fit headrest and secure to motor housing.
14. If fitted: Connect headrest display unit multiplug and secure harness with clips.
15. Position upper finisher and secure retaining clips.
16. Secure squab cover beading to finisher.
17. Secure squab cover velcro strip
18. Connect tension straps securing upper squab cover.
19. Position lower finisher and secure retaining clips
20. Fit screws securing lower squab finisher.
21. Fit backboard tension straps to under seat retaining clips.
22. Fit seat assembly.