Trim Finisher - 'E' Post

Trim Finisher - 'E' Post

Service Repair No - 76.13.32

Remove

1. Open tailgate.
2. Release aperture seal.







3. Release 4 fixings securing 'E' post finisher and carefully release finisher.







4. If fitted: Disconnect speaker multiplug.
5. Remove finisher.
Do not carry out further dismantling if component is removed for access only.







6. If fitted: Remove 3 Torx screws securing speaker and remove the speaker.
7. Remove fixings from finisher.

Refit

1. Fit new fixings to finisher.
2. If fitted: Fit speaker to finisher and secure with screws.
3. If fitted: Connect speaker multiplug.
4. Fit finisher and secure fixings.
5. Fit seal to aperture.