Trim Finisher - 'D' Post - Lower

Trim Finisher - 'D' Post - Lower

Service Repair No - 76.13.31

Remove

1. Remove parcel tray.
2. Release rear seat squab and fold seat forward.
3. Remove sufficient 'D' post door aperture seal to access upper trim finisher.







4. Release 'D' post upper finisher from upper clips.







5. Remove 2 Torx screws securing top edge of lower trim finisher. Release pegs at lower edge and remove.

Refit

1. Fit lower trim finisher and secure with Torx screws.
2. Fit 'D' post upper finisher.
3. Check operation of rear seat belt.
4. Secure seal to door aperture.
5. Position seat in upright position.
6. Fit parcel tray.