Trim Finisher - 'B' Post - Upper

Trim Finisher - 'B' Post - Upper

Service Repair No - 76.13.28

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

Remove

1. Make the SRS system safe.
2. Remove front seat.
3. Release door aperture seal from 'B' and 'C' posts.







4. Release 4 fixings securing 'B' post lower finisher.
5. Release 'B' post upper finisher from fixings and remove finisher assembly.
6. Remove and discard fixings from finisher.
7. Depress clips and remove 'B' post upper finisher from lower finisher.

Refit

1. Fit upper 'B' post finisher to lower finisher.
2. Fit new fixings to finisher.
3. Fit finisher assembly to upper fixings, position seat belt and secure lower finisher to 'B' post.
4. Fit door aperture seals.
5. Fit front seat.
6. Connect battery leads, earth lead last.