Trim Finisher - 'A' Post - Lower

Trim Finisher - 'A' Post - Lower

Service Repair No - 76.13.27

Remove

1. Remove carpet retainer.







2. Release sufficient door aperture seal to access lower trim finisher.
3. Release and remove finisher horizontally from 2 retaining clips.

NOTE: Do not carry out further dismantling if component is removed for access only.

4. Check condition of finisher retaining clips in body, replace if damaged.

Refit

1. Fit retaining clips to body.
2. Fit and secure finisher.
3. Secure door aperture seal.
4. Fit carpet retainer.