Trim Casing - Rear Quarter - Lower

Trim Casing - Rear Quarter - Lower

Service Repair No - 76.13.12

Remove

1. Release 'D' post upper finisher.
2. Remove 'D' post lower trim.







3. Remove Allen screw securing load space securing ring to load space floor, release and remove securing ring assembly.
4. Release and remove seat anchor escutcheon
5. Remove access panel.
6. Release 2 turn buckles.
7. Remove 3 scrivets and release trim casing.







8. Disconnect multiplugs from interior light and accessory power socket.
9. Remove quarter trim.

Refit

1. Position trim casing and connect multiplugs.
2. Fit scrivets and turn buckles to secure trim.
3. Fit access panel.
4. Fit seat anchor escutcheon.
5. Position luggage space securing ring to body, locate peg. Fit and tighten bolt to 25 Nm (18 lbf.ft).
6. Fit 'D' post lower trim.
7. Fit 'D' post upper finisher.