Headliner: Service and Repair

Headlining - Sunshine Sliding Roof Condition

Service Repair No - 76.64.15

Remove

1. Models fitted with sunshine roof: Open sunshine roof.
2. Make the SRS system safe.
3. Remove RH rear seat.
4. Remove 'A' post upper finishers.
5. Remove 'B' post finishers.
6. Remove 'D' post upper finishers.
7. Remove 'E' post finishers.
8. Models with sunshine roof: Remove the sliding roof lid trim.







9. Models fitted with sunshine roof: Remove 15 Torx screws securing headlining to sun roof and remove clamp plate.
10. Remove sun visors.
11. Remove front console from headlining.
12. Remove rear console from headlining.
13. Remove grab handles.







14. Open flap, remove 4 screws securing cargo net upper anchor finishers and remove finishers.
15. Remove seals from door aperture flanges to release headlining.
16. Remove 2 screws securing headlining.
17. Models fitted with sunshine roof: Remove 4 screws securing headlining.







18. Carefully release 3 clips securing rear edge of headlining.
19. With assistance, carefully lower and remove headlining from rear of vehicle.

Refit

1. Fit headlining and secure with screws.
2. Secure clips at headlining rear edge.
3. Fit cargo net anchor finishers and secure with screws.
4. Fit aperture seals.
5. Fit grab handles.
6. Fit rear console.
7. Fit front console.
8. Fit sun visors.
9. Models fitted with sunshine roof: Fit and align clamping plate and tighten screws securing headlining to sunshine roof to 2.5 Nm (1.9 lbf.ft).
10. Models with sunshine roof: Fit the sliding roof lid trim.
11. Fit 'E' post finishers.
12. Fit 'D' post upper finishers.
13. Fit 'B' post finishers.
14. Fit 'A' post upper finishers.
15. Fit rear seat.
16. Models fitted with sunshine roof: Close sunshine roof.
17. Connect the battery earth lead.